Available Options
2” Universal Stationary Spring Cone 2” Universal Black Winding Spring Cone L 2” Universal Red Winding Spring Cone RFeatures
Cones for 2 inner diameter garage door springs One winding cone and one stationary cone on each torsion spring Allows tension to be added and retained Winding cones work with winding bars Stationary cones mount to an anchor bracket If you want to install them yourself, you can follow these steps and get the job done properly. The winding cone is located at one end of the spring. A stationary cone is at the opposite end. Start with the stationary cone. Take the nuts and bolts from the spring anchor bracket and install them in the stationary cone. Using a vise, grip both nuts tightly. The next step is extremely critical regarding the spring removal from the cone. The spring wire end should be hooked with a pipe wrench or by using large channel locks. The wrench should be turned to the point when the spring comes off of the cone.
Product Detail
